A capacitor going weak
Capacitors quit more than any other part once heat arrives, and a spring meter reading is the only warning they give. A weak one is flagged before it strands the house.
An air conditioner that has not been looked at since last summer is the one that quits in the first heat wave. Air conditioning maintenance is the standing check — coils, refrigerant charge, airflow and electrics — kept up through the year so no season is ever missed.
Open 24 hours, 7 days a week. Ring (720) 806-7634, say what system you have and when it was last seen, and the year's visits get mapped out.
Call Now (720) 806-7634 →Phone-only booking — ring to map out the year's visits.
Maintenance is the programme behind a single tune-up: the same thorough check of coils, charge, controls, airflow and drain, kept up on a standing schedule through the year. Visits are booked in advance, seasons are covered, and each visit leaves a written record the next one builds on.
The point of a programme is that the visits happen without anyone remembering to book them. Checks sit on a calendar matched to Denver's seasons — cooling in spring, ahead of the 90s — and the arrangement is set out on the HVAC maintenance plans page. Older central systems across Denver gain most from a record kept year over year.
Every scheduled visit covers the same ground, and the record between visits is what makes it a programme.
The outdoor coil is washed clean of dust and debris at each visit, so air moves through it as designed. In Denver's dusty summers a clean coil is the most useful thing a scheduled check does.
Pressures and superheat are read against the maker's figures and noted down. A charge slipping slowly across two visits points to a leak long before the house feels it.
Capacitor and contactor get a meter test at every visit. Capacitors are the most common summer failure, and a weak reading shows up before it quits.
Indoor coil inspected, filter checked and swapped when loaded, blower wheel looked at for the dust that chokes airflow.
Drain line checked for blockages, so condensation leaves the house instead of pooling in the pan and tripping the float switch.
A full cooling cycle runs with the drop across the coil measured, and the numbers are written down so the next visit can be set against this one.
Ring (720) 806-7634 and describe the system — age, last check, anything noticed. The year's visits are talked through and put on a calendar.
Outside first: condenser coil cleaned, bent fins straightened, fan motor, capacitor and contactor meter-tested at the outdoor unit.
Then the indoor side: coil looked over, filter swapped if it is loaded, and airflow taken through the system.
Refrigerant pressures and temperatures are read and written down, the drop across the coil is measured, and a full cooling cycle runs.
Findings come back in plain words, and the readings stay behind as a written record for the following visit.
A programme runs on readings taken the same way, visit after visit. These are the instruments.
On the service ports at each visit, they show suction and discharge pressure, and the numbers go in the record so a slow drift shows across visits.
A meter reads the capacitor's stored charge and looks at contactor and fan motor for wear — the component likeliest to quit in July.
Bent fins get combed straight again, so air can pass through the outdoor coil after a dusty spring.
Probes at return and supply show how far air cools across the indoor coil — the plainest check that the system is doing its job, visit after visit.
Pressure readings across filter and blower show whether air moves freely or is being choked somewhere in its path.
A soft brush and coil cleaner lift the season's dust from the outdoor coil without folding the fins over.
In Washington Park, a central AC has sat unopened since the day it was fitted. It still cools, yet the outdoor coil is caked in dust.
Coil cleaned, capacitor and controls tested, charge checked, full cooling cycle run with the drop measured — and the readings written down for next year.
A system in Denver cooled less and less as last summer wore on, and the homeowner wants it sorted before this one.
Charge read, coil and filter checked, capacitor tested. A drifting charge or a dirty coil are the usual causes, and both show on a meter.
A family that moved to Denver recently has a central AC nobody has ever serviced, with no record of its age. They want to know its condition before summer.
The full check is worked through — coil, charge, controls, airflow, drain — findings explained in plain words, and the next visit put on the calendar.
Summer breakdowns usually warn in spring. A scheduled visit finds them, and the record shows whether they are worsening.
Ask a pro →Capacitors quit more than any other part once heat arrives, and a spring meter reading is the only warning they give. A weak one is flagged before it strands the house.
Dust on the outdoor coil stretches run times while cooling less. A spring wash gives the coil its airflow back.
Charge only ever falls because something leaks. A spring reading finds the leak while the house is still comfortable, and the record shows whether it is drifting year over year.
A drain clogged with algae and dust backs water into the pan and trips the float switch — or the ceiling below. Checking it belongs to every visit.
Denver's cooling season is short — around 750 to 1,000 cooling degree days — but the summers run into the 90s, so a system that is checked on a schedule carries those weeks far better than one that is only looked at when it breaks.
Google's 11 reviews of Lion Tech Home Services are all five-star, giving a 5.0 rating.
“Martin was very prompt in responding to our requests and completing the work on a timely basis. His expertise is HVAC but he is very capable in all home maintenance areas. We have complete confidence in Martin's abilities and work and will call on him for any future projects we might have.”
JERRY SUNDBY — Google review
Spring, ahead of the cooling season. March through May is the usual window — Denver summers reach the 90s, so the check belongs before the system carries its heaviest load, and the year's visits sit on a calendar so none is left to memory.
Condenser coil cleaned, refrigerant charge checked, capacitor and controls tested, filter and blower looked at, drain inspected, full cooling cycle run — readings written down.
A system can cool fine while a part wears out. A capacitor going weak or a coil clogging with dust gives no warning until it fails; the visit finds those parts first, and the record shows whether they are wearing year over year.
Look at it monthly through summer and change it when light no longer passes through. A clogged filter is the most common cause of frozen coils Lion Tech Home Services sees, and it is changed on the visit when needed.
Ring (720) 806-7634 and book a maintenance visit. The check runs in order, readings are written down, and findings come back in plain words.
Call (720) 806-7634 →Lion Tech Home Services, Denver — call (720) 806-7634, open 24 hours.